| Customization: | Available |
|---|---|
| Type: | Webbing Sling |
| Material: | PE |
|
Still deciding? Get samples of US$ 10/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1T FLAT WEBBING SLING is one of the basic types of slings used as equipment for lifting devices and is made from 100% polyester with reinforced eyes, The WLL of the sling is 1000Kg , and has a maximum breaking strain of 7 times its WLL.
|
Type |
1T FLAT WEBBING SLING |
|
Brand Name |
D. L.T SLING |
|
Material |
100% PES |
|
Width |
25mm/30mm |
|
Length |
Can be customized as require |
|
W.L.L |
1ton/1000kg |
|
Safety Factor |
5:1,6:1,7:1,8:1 all available |
|
Layer |
two ply |
|
Color |
violet, purple |
|
Standard |
EN1492-1 |
|
Certificate |
ISO9001, CE, TUV-GS, etc. |
|
Place of Origin |
Nanjing,Jiangsu, China
|
|
Packing |
plastic bag, carton and pallet |
Using Belt Slings Safely
Do not attempt lifting operations unless you understand the use of the equipment, the slinging procedures and themode factors to be applied. Do not use defective slings or accessories. Check the correct engagement with fittingsand appliances, ensure smooth radii are formed, do not twist or cross slings and do not overcrowd fittings. Position the sling so that the load is uniformly spread over its width. Position the bight for a choke lift at the natural (120°) angle to prevent friction being generated. Ensure that stitching is in the standing part of the sling away from hooks and other fittings. Take the load steadily and avoid shock loads. Do not leave suspended loads unattended. In an emergency cordon off the area.
In-service Inspection and Maintenance
Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged, chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation; damaged or deformed end fittings.
){kind=link}